Daniel Defense M4A1 CC (CA Compliant) 5.56 10+1 Rounds 14.5" Black Phosphate Bbl/FDE/Black 6-Pos Adj Stock Semi-Auto Rifle Nexgen Outfitters

Daniel Defense M4A1 CC (CA Compliant) 5.56 NATO 10+1 Rounds 14.5" Black Phosphate Bbl/FDE/Black 6-Pos Adj Stock Semi-Auto Rifle

Daniel Defense
SKU:
SH3444
|
UPC:
815604016605
$2,345.99
(No reviews yet)
Current Stock:
Adding to cart… The item has been added
Description

PLEASE READ THE FIREARM ORDER AGREEMENT BEFORE PURCHASING THIS ITEM

The Daniel Defense M4A1 features the M4A1 RIS II, which has been in use by US Special Operations Command (SOCOM) for the SOPMOD II Weapons System since 2005. The M4A1 features a 14.5 Cold Hammer Forged M4 Profile barrel with a permanently attached Daniel Defense Flash Suppressor. This rifle also comes with the rugged and comfortable Daniel Defense Buttstock and Pistol Grip.

The Daniel Defense California compliant design prevents the magazine release button from being engaged while fully assembled, locking the magazine into the receiver. To release the magazine from the rifle, the shooter will be required separate the upper from the lower by pulling on an extended (rear) takedown pin with an attached cord to make the process easier.

MATERIALS & CONSTRUCTION

  • LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
  • UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
  • BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 Twist, 14.5" M4 Profile, Chrome Lined, Mil-Spec Heavy Phosphate Coated, and HP/MPI Tested
  • GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 Hardened Steel with Mil-Spec Heavy Phosphate Coating, Carbine Length, Direct Impingement
  • MUZZLE DEVICE: Pinned and Welded Daniel Defense Flash Suppressor, Extended, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
  • BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
  • BUFFER: H Buffer
  • SIGHTS: Sold Separately
  • HANDGUARD: Daniel Defense M4A1 Rail Interface System (RIS) II, CNC Machined of 6061-T6 Aluminum
  • CHARGING HANDLE: GRIP-N-RIP Charging Handle, Body CNC Machined of 7075-T6 Aluminum, Handles & Latch CNC Machined of 6061-T6 Aluminum, Heavy-Duty Stainless-Steel Roll Pins, Type III Hard Coat Anodized
  • RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
  • BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
  • PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
  • RAIL PANELS: Daniel Defense Rail Panels made from Santoprene, Heat Resistant to 300° F.
  • Made in the USA!

Specs:

Metal Finish: Black HardCoat Anodized/Black Phosphate
Action: Semi-Automatic
Caliber: 223 Remington/5.56 NATO
Barrel Length: 14"
Capacity: 10+1 Rounds 
Trigger: Geissele
Safety: Manual
Overall Length: 31.1"
Weight: 6.7 lbs.
Stock Description: 6-Position Black
Muzzle: Flash Suppressor
Receiver Material: 7075 T6 Aluminum
Sights: None, Optic Ready
Barrel Description: Chrome-Lined Cold Hammer-Forged
Twist: 1:7"
Barrel Length Range: 13.00" to 15.99"
Weight Range: 6.00 lbs. to 7.99 lbs.
Hand: Right
Stock Finish Group: FDE/Black
Metal Finish Group: Blued/Black

WARNING! Please read restrictions before ordering.
  • Nexgen Outfitters does NOT accept returns of any firearms or ammunition.
  • Long gun buyers MUST be 18 years of age or older.
  • You are responsible for choosing the correct ammunition for your firearm.
  • ALWAYS check your local laws for any other regulations that may affect your purchase or possession of a firearm/ammunition before ordering any firearms or ammunition.
Additional Information
Model Number:
M4A1 CC (CA Compliant)
Gauge or Caliber:
5.56 NATO
Barrel Length:
14.5"
Barrel Finish:
Black Heavy Phosphate
Threaded Barrel:
Yes
Capacity (rounds):
10+1
Color:
DD FDE Color
Stock Type:
Adj Stock